模具的维护要领

来源：wenku7.com 资料编号：WK711895 资料等级：★★★★★ %E8%B5%84%E6%96%99%E7%BC%96%E5%8F%B7%EF%BC%9AWK711895

以下是资料介绍,如需要完整的请充值下载。
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用. 密保惠帮助

资料介绍

外文翻译:
模具的维护要领(中文5900字,英文3800字)
级进模的维护，须做到细心、耐心、按部就班，切忌盲目从事。因故障拆模时，需附有料带，以便问题的查询。打开模具，对照料带，检查模具状况，确认故障原因，找出问题所在，再进行模具清理，清洗掉料屑等，方可进行拆模。拆模时，受力要均匀。针对卸料弹簧在上模(固定)板与卸料板之间的模具结构形式，其卸料板的拆卸，应保证平衡弹出。卸料板的倾斜有可能导致模内凸模断裂。

外文原文:
A mold maintenance essentials
Progressive die maintenance, must be careful, patient, step by step and avoid blindly engaged. Form removal due to malfunction when the tape must be attached to the issue of the inquiry. Open the mold, the care with, check the mold situation, identifying the reasons of failure to identify the problems, then clean up the mold, washed debris and other material before proceeding to form removal. Form removal, the force should be uniform. Spring in the mold for the discharge (fixed) between the plate and stripper plate mold structure, the demolition of their discharge board should ensure balanced pop. Discharge board tilt could lead to mold punch fracture.